투과 부

GW7DCT2 7DCT450 Haval H6 1.5T 2020 20-50744-SX용 듀얼 매스 플라이휠 어셈블리 중고 플라이휠

1. Product Overview This is a used but fully inspected double mass flywheel assembly , specifically designed for the Haval 7DCT450 (GW7DCT2) 7-speed dual-clutch transmission . It fits 2020 Haval H6 1.5T and other compatible models like H4 and F5. The double mass flywheel is a key component that absorbs engine vibrations, reduces gearbox noise, and ensures smooth power delivery to the dual-clutch transmission. A faulty flywheel often causes abnormal noise, vibration, harshness

Explorer Edge Taurus에 맞는 Ford 6F50 변속기용 BT4Z-7902-C 재생산 토크 컨버터

1. Testing & Quality Control Process Full Disassembly & Inspection : The converter is completely disassembled, and all components are inspected for wear, damage, and defects. Cleaning & Resurfacing : All components are cleaned, and critical surfaces are resurfaced to ensure proper seal and clutch contact. Component Replacement : Worn bearings, seals, and lock-up clutch linings are replaced with high-quality replacement parts. Assembly & Balancing : The converter is reassemble

포드 익스플로러 엣지 타우러스 3.5L FWD AWD 6단 자동 변속기와 재제조 6F50 토크 변환기 BT4Z-7902-C

1. Product Overview This is a professionally remanufactured torque converter assembly , OE part number BT4Z-7902-C , designed for the Ford 6F50 6-speed automatic transmission . It is compatible with multiple Ford vehicles equipped with the 6F50 transmission. The torque converter is the critical component that transfers engine power to the transmission while allowing smooth operation at idle and during gear changes. This remanufactured unit eliminates common issues like

414702D011 현대 투슨/코나 & 기아 스포츠테이지/소울 1.6T 2015-2023용 새로운 D7UF1 클러치 액추에이터

1. Testing & Quality Control Process Component Inspection : Each motor, solenoid, and housing is inspected for quality, fit, and manufacturing accuracy. Functional Testing : The actuator is tested for clutch engagement/disengagement speed, response time, and control signal accuracy. Environmental Testing : The actuator is tested for heat resistance, vibration stability, and waterproof performance to withstand harsh under-hood conditions. Calibration Verification : The

현대 투손/코나 및 기아 스포티지/소울 1.6T 2015-2023 용 새로운 D7UF1 클러치 액츄에이터 414702D011

1. Product Overview This is a brand-new DCT clutch actuator assembly , OE part number 414702D011 , designed for the Hyundai/Kia D7UF1 7-speed dry dual-clutch transmission . It is compatible with Hyundai Tucson, Kona and Kia Sportage, Soul models from 2015 to 2023. The clutch actuator is the core control component of the dry DCT transmission, responsible for operating the dual clutches to engage and disengage gears. Manufactured to OEM specifications, this unit eliminates

BYD Destroyer 05 Song DM 1.5L DMi DHT30 E-CVT 변속기용 P3 입력 샤프트 어셈블리 27T 사용

1. Product Overview This is a professionally tested used P3 input shaft assembly (27T) , designed for the BYD DHT30 E-CVT transmission . It is compatible with BYD Destroyer 05 (2023+) and Song DM (2017+) models with the 1.5L DMi powertrain. The P3 input shaft is a core component of the DHT30 hybrid transmission, transferring power from the electric motor to the gear train. Manufactured to OEM specifications, this assembly eliminates common issues like gear noise, power loss,

Toyota Hilux 3.0T/4.0L/4.7L (2003-2017) 용 새로운 A750F/A750E 자동 변속기 와이어 하네스 8212560650

1. Testing & Quality Control Process Component Inspection : Each part of the harness (wires, connectors, insulation) is inspected for quality and durability. Electrical Testing : The entire harness is tested for conductivity, continuity, and signal integrity. Fit Verification : All connectors and wire lengths are measured to ensure they fit perfectly in the transmission housing. Environmental Testing : The harness is tested for heat, oil, and chemical resistance to withstand

TRANSMESUN Toyota Hilux A750F 5단 변속기 내부 솔레노이드 배선 하니스

1. Product Overview This is a brand-new transmission internal wire harness , OE part number 8212560650 , designed for the Toyota A750F/A750E 5-speed automatic transmission . It is compatible with Toyota Hilux models from 2003 to 2017, including 3.0T, 4.0L, and 4.7L engine variants. The internal wire harness connects the transmission solenoids, sensors, and TCM (Transmission Control Module), transmitting critical signals for gear shifting, pressure control, and fault detection

TRANSMESUN 5T0 M3WC 변속기 백 하우징 212305T0010 Honda Fit 1.5L용

1. Testing & Quality Control Process Visual & Dimensional Check : The housing is inspected for cracks, warpage, and damage; key dimensions and mounting points verified against OEM specs. Deep Cleaning : The housing is ultrasonically cleaned to remove debris, sludge, and contaminants. Pressure Testing : The housing is pressure-tested to ensure no leaks under operating conditions. Sealing Surface Inspection : Sealing surfaces are checked for damage or warpage that could cause

페이지 4 의 117